Bricoloisirs, le bricolage professionnel pour tous

DEGRIPPANT 6 FUNCTIONS

Characteristics:
- Releasing, extracting tar, lubricant, anti-corrosion/anti-humidity, reducer of friction.
- Very low surface Tension allowing an excellent penetration.
- Not flash > 56°C
- Net Volume = active matter 97% usable
- Non flammable propellant Gas.

Use :
- Thanks to its wettability, penetrates with the heart of the oxidized parts.
- Allows the easy disassembling of the sets seized up and corroded (bolts, nuts, hinges, trees, pulleys) in the industrial fields, public works, the farm equipment.
- Excellent lubrication of all the microphone-mechanisms.
- Dissolution of greases and tar.
- Allows to reduce the coefficient of friction between the moving parts and the supports.
- The movement of the released parts supports.

Instructions:
- To agitate the aerosol before employment.
- To vaporize with 20cm parts to be treated.
- To wait a few moments, to start again the operation for the strongly seized up parts.
- Functions in all the positions, moreover its tube extension cable allows him to reach the difficult places of access.

Recommendations :
- Pressure vessel.
- To protect from the solar rays and not to expose to a temperature higher than 50 °C.
- Not to bore, not to burn, even after use.
- Not to vaporize on a flame or an incandescent body.
- To preserve at the variation of any flame or source of spark or ignition.
- Not to smoke.
- To preserve out of reach children.

NOT TO USE FOR A USE OTHER THAN THAT FOR WHICH THE PRODUCT EAST INTENDS

PRODUCT A PROFESSIONAL USE - NEANT
 

DEGRIPPANT WITH THE MOS 2

Characteristics:
- Usable in all position.
- Very high capacity of capillarity.
- Weak surface tension.
- A damp-proof agent which contains pushes back water and then prevents it from penetrating.
- Leaves an anti-corrosive protective film.
- Active Product at point flash > 55°C, non flammable propellant gas.

Uses:
- General-purpose product: lubricant, guard, releasing, waterproofing
- Usable in a great number of fields: car, agriculture, TP, industry...

Instructions:
- To pulverize directly above the part to be treated.
- To await the penetration a few minutes and to try to free.
- To pulverize again and let penetrate until release of the seized up parts.
- The tube extension cable makes it possible to reach the inaccessible parts.

Recommendations:
- Pressure vessel.
- To protect from the solar rays and not to expose to a temperature > with 50°C.
- Not to bore, not to burn, even after use.
- Not to vaporize towards a flame or an incandescent body.
- To preserve at the variation of any flame or source of spark or ignition.
- Not to smoke, preserve out of reach children and to use only in the well broken down zones.


NOT TO USE FOR A DIFFERENT USE SWEATS THAT FOR WHICH THE PRODUCT EAST INTENDS
 

NOVELTY !!

MULTIPURPOSE GREEN GREASE

CHARACTERISTICS :
- Damp-proof grease multipurpose of green colour.
- Smooth, runny aspect.
- Nature of the soap = soap of lithium.
- No drop = + 193°C.
- Penetration ASTM in 25°C before job = 265-295.
- Test of soldering Shell 4 balks = 320 kg.
- Norm marinades ASTM 7420 B.
- Insolvable in fresh water and seawater.
- Beach of use = - 10°C in + 150°C.
- Easily inflammable preparation.
- Noninflammable propellent gas.

USES :
- Protect and lubricate very the mechanical surfaces in movement or not, subjected to the different actions of humidity, water, the hot or sour steam, dust etc.
- Big power of sticking and insolubility.
- Power extreme importing pressure.
- Big resistance to the saline atmosphere.
- Recommended in marine middle.
- Produced in professional usage.

INSTRUCTIONS :
- Clean parties to be treated before application.
- Good to agitate the spray can before every use (presence of a balk).
- Act on parties to be protected with or without the guiding tube, according to the importance of the lubrication to be performed.

RECOMMENDATIONS :
- Container under pressure.
- To protect against the solar rays and not to display in the upper temperature in 50°C.
- Not to break through, not to burn, even after usage.
- Not to atomize towards a flame or an aglow body.
- Keep away from any flame or source of spark or ignition.
- Not to smoke.
- Kept out of reach by children.
- Not to use for an usage other than the one for whom the product is intended. 

LUBRICATING HIGH TEMPERATURE ALUMINIUM

Characteristics:
- Paste of assembly, anti lubricant seizing up resistant to very high temperatures.
- Complex of powder of aluminium and agents extreme pressure in a mineral support, (lithium soap) with additive of adhesiveness and gelling agent. Insoluble in water.
- Avoids the heating and seizing between two parts moving.
- Easy disassembling, without wrenching.
- Allows to catch up with the deteriorated nets, without use of taps and dies.
- Not to use on very fast rotating movements.
- For the chemical industry, the navy, the iron and steel industry, glassmaking etc.

Instructions:
- To strongly agitate before each use until "separation" of the ball which one must hear inside the aerosol.
- To pulverize to approximately 20 cm before assembly, or on parts in course of movement for a good penetration.
- After use, to turn over the aerosol head in bottom and to purge in order to maintain clean and unscathed of product the opening of the diffuser.

Recommendations :
- Pressure vessel.
- To protect from the solar rays and not to expose to a temperature higher than 50 °C.
- Not to bore, not to burn, even after use.
- Not to vaporize on a flame or an incandescent body.
- To preserve at the variation of any flame or source of spark or ignition. Not to smoke.
- To preserve out of reach children.

NOT TO USE FOR A USE OTHER THAN THAT FOR WHICH THE PRODUCT EAST INTENDS.

PRODUCT A PROFESSIONAL USE - INFLAMMABLE - IRRITANT - DANGEREUX POUR L'ENVIRONNEMENT
 

POLISH WITHOUT SILICONE MINT

Characteristics:
- Mixture of vegetable oil and oil distillates.
- Light mentholated odor.
- Without silicone. Without chlorinated solvent.
- Colourless, easily flammable liquid preparation.
- Insoluble in water.
- Non flammable propellant gas.

Use:
- Recommended in the maintenance of the skaïs, wood, laminated etc.
- Restoration of the dashboards and other plastic elements of the trimmings of vehicles.
- A new aspect on the plastic surfaces tarnished by the light and dust gives again.
- Thanks to the absence of silicones the application later of painting allows on treated surfaces.
- Without harmful effect for the environment of work.

Instructions:
- To agitate the aerosol.
- To pulverize with approximately 20cm parts to be renovated.
- To rub slightly with a soft rag to unify the brightness.

Recommendations:
- Pressure vessel.
- To protect from the solar rays and not to expose to a temperature higher than 50 °C.
- Not to bore, not to burn, even after use.
- Not to vaporize on a flame or an incandescent body.
- To preserve at the variation of any flame or source of spark or ignition.
- Not to smoke.
- To preserve out of reach children.

NOT TO USE FOR A USE OTHER THAN THAT FOR WHICH THE PRODUCT EAST INTENDS

PRODUCT A PROFESSIONAL USE - FLAMMABLE - IRRITANT - DANGEROUS FOR THE ENVIRONMENT
 

LUBRICATES WHITE WITH THE P.T.F.E

Characteristics :
- Mineral oil codex gelled, especially formulated for the use in wet medium additivée in P.T.F.E (polytétrafluoro ethylene).
- Butyreux Aspect.
- Food Contact Fortuitous H1
- Beach of use: -20 with +180°C (until 200°C at a peak)
- Without point of drop.
- Test 4 balls = 300kg
- Flammable preparation.
- Non flammable propellant gas.

Uses:
- Usable in food agro industry in the event of fortuitous contacts (industrial flour-millings, bakeries, biscuit factories, dairies, canning facilities, factories of chicken demolition, slaughter-houses, industrial pork-butcheries, breweries).
- This grease is recommended in the fields of plumbing, mechanics and the car, in the bathrooms, kitchens, workshop, all building technical etc. - Everywhere where a lubricant not dirtying is desired.
- It can be eliminated by organic solvents.

Instructions:
- To clean the parts carefully to be treated before pulverization.
- To strongly agitate the aerosol.
- To pulverize the product using the tube extension cable for the quite precise places to reach, or to remove it for surfaces more important to treat.

Recommendations :
- Pressure vessel.
- To protect from the solar rays and not to expose to a temperature higher than 50 °C.
- Not to bore, not to burn, even after use.
- Not to vaporize on a flame or an incandescent body.
- To preserve at the variation of any flame or source of spark or ignition.
- Not to smoke.
- To preserve out of reach children.

NOT TO USE FOR A USE OTHER THAN THAT FOR WHICH THE PRODUCT EAST INTENDS

PRODUCT A PROFESSIONAL USE - NEANT
 

OILS FOR MACHINING (TAPPING, DRILLING, THREADING)

Characteristics :
- Mixture of mineral oils and synthetic additivées. Nonsoluble whole oil.
- No dangerous component contains. Free from chlorine, nitrites.
- Liquid with 20°C, brownish color, viscosity 130 Cst with 40°C - Not flash of oil > 170°C.
- Capacity extreme pressure.
- Oil extreme pressure, properties anti-welding, anti-wear, anti-rust and anti-corrosion.
- Strong wettability and penetrating.
- Rinçable with water.
- Excellent evacuation of megacals.
Uses :
- By its low viscosity, its wettability and penetrating, this oil is especially recommended on the majority of metals of the type stainless, chromium and their alloys for tapping, the drilling and the threading of small diameters, sawings, turning.
- Effective for the special steels, iron, cast iron, copper, bronzes, brass, aluminium and metals non-ferrous etc.

Instructions :
- To agitate the aerosol before pulverization of the parts to be lubricated.
- To use the tube extension cable for a more precise application.
- To regularly repeat the operation of lubrication during work.

Recommendations :
- Pressure vessel.
- To protect from the solar rays and not to expose to a temperature higher than 50 °C.
- Not to bore, not to burn, even after use.
- Not to vaporize on a flame or an incandescent body.
- To preserve at the variation of any flame or source of spark or ignition.
- Not to smoke.
- To preserve out of reach children.

NOT TO USE FOR ANOTHER USE THAT THAT FOR WHICH THE PRODUCT EAST INTENDS

PRODUCT A PROFESSIONAL USE
 

OILS FOOD CODEX / INDUSTRY

Characteristics:
- General-purpose lubricant for small mechanisms based on mineral oil codex, colourless, odourless, without savour.
- Especially formulated for small lubrication in food medium (industry, kitchen...).
- Release agent without silicone, agent of slip.
- Protection anti corrosion.
- Adherent anti properties.
- Insoluble in water.
- Not flash of oil > 170°C after evaporation of solvents
- Viscosity with 25°C = 23 Cst.
- Behaviour in temperature = -15 with +120°C
- Non flammable propellant gas

Uses:
- Lubricant of all elements and delicate mechanisms moving
- Recommended in food industry: Chains, tools of cutting, conveyors, slides, axes, casters, locks, cables, beds tools, etc.
- The adherence of electric projections of weldings avoids.
- Agent of slip for the woodworking machineries.
- Without influence on the later surface treatments (painting, electrolysis, galvanization etc).

Instructions:
- To pulverize the spray to approximately 20 cm of the parts to treat time necessary to cover surfaces with a fine layer.
- To use the tube extension cable for a lubrication of precision.

Recommendations:
- Pressure vessel.
- To protect from the solar rays and not to expose to a temperature higher than 50 °C.
- Not to bore, not to burn, even after use.
- Not to vaporize on a flame or an incandescent body.
- To preserve at the variation of any flame or source of spark or ignition.
- Not to smoke.
- To preserve out of reach children.

NOT TO USE FOR ANOTHER USE THAT THAT FOR WHICH THE PRODUCT EAST INTENDS

PRODUCT A PROFESSIONAL USE
 

WD-40 est un produit polyvalent de très haute qualité pour les besoins de dégrippage, luttes anti-humidité et corrosion, lubrification et nettoyage.
Aérosol de 500 ml professionnelle. 

WD-40 est un produit polyvalent de très haute qualité pour les besoins de dégrippage, luttes anti-humidité et corrosion, lubrification et nettoyage.
Bidon de 5 litres + pulvérisateur.